This site is Mobile Device Friendly

ALLOY FCR200S5.20 | 100Mbps Standalone/Rackmount Media Converter 100Base-TX to 100Base-FX 1550nm WDM, 20Km

Be the first to review this product

The FCR200S5.20, a FCR200 Series Fast Ethernet Media Converter, can be used 'Standalone' or installed in an Alloy DCR12 Series Media Converter Chassis, and has a 100Base-TX and a 100Base-FX WDM 1550nm singlemode/singlecore port, with 20Km.max range.
SKU: FCR200S5.20

Availability: In stock

$247.00
ALLOY

More than 90% of orders are shipped within one business day.

Check out our 30 day store wide refund policy for your peace of mind.

We work hard to keep our prices low and give you the best deals on line.

Connect with us online, by e-mail or call 1300 IRONLINE (1300 476 654).

Similar Products:

ALLOY ACR155SC.20 | ATM Standalone/Rackmount Media Converter OC-3/155Mbps Multimode to Singlemode, 20Km
$675.00
ALLOY ACR155SC.40 | ATM Standalone/Rackmount Media Converter OC-3/155Mbps Multimode to Singlemode, 40Km
$742.00
ALLOY ACR155SC.60 | ATM Standalone/Rackmount Media Converter OC-3/155Mbps Multimode to Singlemode, 60Km
$796.00
ALLOY ACR622SC.15 | ATM/SONET Standalone/Rackmount Media Converter, OC-12 Multimode - Singlemode, 15Km
$1,335.00
ALLOY ACR622SC.40 | ATM/SONET Standalone/Rackmount Media Converter, OC-12 Multimode - Singlemode, 40Km
$1,429.00

Product Description

Details

The FCR200S5.20, a FCR200 Series Fast Ethernet Media Converter, can be used 'Standalone' or installed in an Alloy DCR12 Series Media Converter Chassis, and has a 100Base-TX and a 100Base-FX WDM 1550nm singlemode/singlecore port, with 20Km.max range.

ALLOY FCR200S5.20 100Mbps Standalone/Rackmount Media Converter 100Base-TX to 100Base-FX 1550nm WDM, 20Km
The FCR200S5.20, a FCR200 Series Fast Ethernet Media Converter, can be used 'Standalone' or installed in an Alloy DCR12 Series Media Converter Chassis, and has a 100Base-TX and a 100Base-FX WDM 1550nm singlemode/singlecore port, with 20Km.max range.

The FCR200S5.20 is a dual purpose Fast Ethernet WDM Media Converter. It can be used as a standalone discrete device, or can be installed as a Media Converter Module into any Alloy 12-slot Media Converter Chassis. Whichever mode the FCR200S5.20 is used in, it is a flexible solution ideal for a wide variety of media conversion applications in Fast Ethernet network environments, particularly where network fibre cable cores are at a premium. With dual 100Base-TX auto-sensing 10/100Mbps RJ-45 and 100Base-FX SC terminated WDM singlemode ports, the FCR200S5.20 is an ideal solution for UTP/STP copper to Fast Ethernet singlemode/singlecore fibre media conversion tasks. The RJ-45 port supports Fast Ethernet and Ethernet UTP/STP links at up to a 100 metres range, and the 100Base-FX WDM port multiplexes both Send and Receive datastreams on a single fibre core, up to a maximum fibre cable range of 20 kilometres. This WDM capability halves fibre core usage, and can avoid the need to lay new cable where existing fibre core capacity is already fully utilised. The FCR200S5.20, which utilises 1550nm wavelength for it's Tx datastream, must be used with Alloy's FCR200S3.20 1550 Rx rated WDM Converter (or a similarly specified device) at the other end of the link.

The FCR200S5.20 is a model from Alloy's FCR200 Series of Dual Purpose Media Converters. As mentioned above, these Converters can be used 'standalone' or installed in an Alloy DCR12 Series Media Converter chassis. Models in the series support most types of Fast Ethernet media conversion, including 10/100Mbps RJ-45 copper to 100Base-FX multimode fibre (with LC, SC, ST or MT-RJ connectors, maximum fibre cable range of 2Km), 10/100Mbps RJ-45 copper to 100Base-FX singlemode fibre (SC connectors; 5, 20, 40, 60, 80 and 100Km ranges with individual models supporting 1300nm or 1550nm wavelengths) and 10/100Mbps RJ-45 copper to 100Base-FX WDM singlemode/singlecore fibre (SC connectors with 20, 40, 60, 80 or 100Km range, with send and receive datastreams mutliplexed over a single fibre core). All models in the range are housed in a compact, highly durable all-metal case.

When used in 'standalone' mode as a discrete Media Converter device, all models in the FCR200 Series can be powered either by an external plugpack (supplied with the Converter), or via a supplied USB cable which can derive power from any v1.1, v2 or V3 USB port. All FCR200 Series models have comprehensive LED suite enabling status monitoring of the Converter, and also a DIP Switch array on the side panel which is used to manually set LFP status (see below) and/or link speed/duplex mode settings. The RJ-45 port on all models is auto-sensing MDI/MDIX, with speed, duplex mode and DTE/DCE mode automatically sensed and set.

A particular feature to note for all FCR200 Series Converters is their support for Link Fault Passthrough (LFP) in both Far-end-Fault (FEF) and Forced Modes (FM). LFP allows these Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link. Combining FM and FEF LFP functions supports troubleshooting and network security capability, as both end devices can be notified of a loss of fibre link and a managed switch connected to a FCR200 Series Converter can be configured to disable the link and notify administrators of the event.

FEATURES

  • FCR200S5.20 model: Fast Ethernet copper to WDM 'single core' 1550 Tx fibre media conversion - 20Km fibre range
  • Dual Purpose FCR200 Series - use 'standalone' or install in a DCR12 Series Media Converter Chassis
  • FCR200 Series: Fast Ethernet copper to multimode, singlemode and WDM Media Conversion solutions
  • FCR200 Series: models with copper to 1300nm and 1550nm singlemode fibre support
  • LC, SC, ST, and MT-RJ fibre connectors supported on individual FCR200 Series models
  • Up to 100 kilometres fibre range supported with FCR200 Series Converters
  • Easy 'Slide-in, Hot Swap' installation into DCR12 Media Converter Chassis systems
  • Supports Forced and Far-end Fault mode Link Fault Passthrough (LFP)
  • All FCR200 models powered by external plugpack or via USB connection
  • Compact, rugged all-metal case

SPECIFICATIONS
FCR200 SERIES CONVERTER SPECIFICATIONS
Implementation and Installation
Dual Purpose Implementation

  • Use as a 'Standalone' discrete Media Converter device or
  • Install as a Media Converter Module in to any DCR12 Series Media Convert Chassis

Installation in to DCR12 Chassis

  • Converters installed in slots 1 to 12 of any DCR12 Series Media Converter Chassis
  • Any mix of FCR200 Series Converters can be used as Converter Modules plus
  • GCR2000, ECR10, ACR and SCR Converters can also be used as Converter Modules in DCR12 Chassis
  • All Converter Series types are 'slide-in, Hot Swap' field/user upgradable devices

Converter Module Speed/Interfaces/Protocol Support/Wavelength/Max. Range
This model

  • FCR2000S5.20: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1550nm Tx, 20Km range
  • Other models in the FCR200 Series
  • FCR2000LC: 100Mbps; 100Base-TX RJ-45 (100m max) to 100Base-FX with LC connector, 2Km max range
  • FCR2000SC: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 2Km range
  • FCR2000ST: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with ST connector, 2Km range
  • FCR2000MT: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with MT-RJ connector, 2Km range
  • FCR2000SC.05: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1300nm, 5Km range
  • FCR2000SC.20: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1300nm, 20Km range
  • FCR2000SC.40: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1300nm, 40Km range
  • FCR2000SC.60: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1300nm, 60Km range
  • FCR2000SC.0515: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1550nm, 5Km range
  • FCR2000SC.2015: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1550nm, 20Km range
  • FCR2000SC.4015: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1550nm, 40Km range
  • FCR2000SC.6015: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1550nm, 60Km range
  • FCR2000SC.8015: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1550nm, 80Km range
  • FCR2000SC.10015: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX with SC connector, 1550nm, 100Km range
  • FCR2000S3.20: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1310nm Tx, 20Km range
  • FCR2000S3.40: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1310nm Tx, 40Km range
  • FCR2000S5.40: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1550nm Tx, 40Km range
  • FCR2000S3.60: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1310nm Tx, 60Km range
  • FCR2000S5.60: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1550nm Tx, 60Km range
  • FCR2000S3.80: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1310nm Tx, 80Km range
  • FCR2000S5.80: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1550nm Tx, 80Km range
  • FCR2000S3.100: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1310nm Tx, 100Km
  • FCR2000S5.100: 100Mbps; 100Base-TX RJ-45 (100m) to 100Base-FX WDM, singlecore SC, 1550nm Tx, 100Km

Performance
Data Transfer Rate

  • 100Mbps: 148,800pps
  • 10Mbps: 14,880pps

Buffer Memory

  • 128K

Packet Size

  • Supports packet length up to 1536 bytes

Network Interfaces

  • 100Base-TX Ports
  • Auto-Negotiation
  • Auto-MDIX
  • Transmission: Full or Half-Duplex
  • Flow Control: 802.3x Flow Control (Full-Duplex mode), Backpressure for Half-Duplex
  • 100Base-FX (Multimode)
  • Auto-Negotiation
  • Transmission: Full or Half-Duplex
  • Flow Control: 802.3x Flow Control (Full-Duplex mode), Backpressure for Half-Duplex
  • Wavelength: 1300nm

100Base-FX (Singlemode)

  • Auto-Negotiation
  • Transmission: Full or Half-Duplex
  • Flow Control: 802.3x Flow Control (Full-Duplex mode), Backpressure for Half-Duplex
  • Wavelength: 1300nm and 1550nm singlemode; singlemode WDM multiplexed 1310/1550nm (model dependent)

Cable Types Supported

  • UTP or STP copper: CAT5 or higher
  • Multimode fibre: 62.5/125µm, 50/125µm recommended (other grades may be used)
  • Singlemode/WDM fibre: 9/125mm recommended (other grades may be used)

Link Fault Passthrough (LFP) Functions

  • LFP Forced and Far End Fault modes supported
  • Default configuration - ON
  • DIP switch for LFP ENABLE/DISBALE manual selection

Mechanical

  • Case: compact all-metal enclosure

LED Indicators

  • Power - Green; when lit +5V power is coming up
  • TX Link/Act - Green; when lit TP connection good, blinks when traffic present
  • TP 100 - Green; when lit speed = 100Mbps, when Off speed = 10Mbps
  • FX Link/Act - Green; when lit TP & Fibre connection good, blinks when Fibre traffic present
  • FX FDX/COL - Amber; when lit full duplex mode, Off half duplex, blinks with traffic collision

DIP Switch Configuration

  • DIP 1: Set TP port sensing mode to Auto (default) or Forced
  • DIP 2: Set TP port speed, 100Mbps or 10Mbps when TP at Forced
  • DIP 3: Set TP port duplex mode, FDX or HDX when TP at Forced
  • DIP 4: Set LFP status, LFP enabled (default) or disabled
  • DIP 5: Set Fibre port duplex mode, 100 FDX (default) or 100 HDX

Environmental

  • Power Requirement : 1A@+5VDC (from Plugpack)
  • USB Power: 0.5A@+5VDC from USB port
  • Ambient Temperature : 0° to 50°C
  • Humidity : 5% to 90%
  • Dimensions : 26.2(H) x 94(L) x 70.3(W) mm

Emission and Safety Regulations

  • Complies with FCC Part 15 Class A, CE Mark Approval, C-Tick

Standards Compliance

  • IEEE 802.3u 100Base-TX specification
  • IEEE 802.3 10Base-T specification
  • IEEE 100Base-FX specification
  • IEEE 802.3x full-duplex flow control specification

Additional Information

Additional Information

Manufacturer ALLOY
MPN No
Warranty Statutory Manufacturer Warranty

Brand Description

 

Alloy Computer Products Ltd is also known as Alloy by customers throughout Australia and New Zealand. This is simply because of the wealth of expertise and value-adding perks that they incorporate in their operations as a renowned, full-service distributor of industrial networking and communications solutions.

As such, Alloy provides small, medium and enterprise sized organizations with highly integrated IT and networking solutions which enable them to share information and resources. The company also supplies and supports their own Alloy range of enterprise networking products. So whether you need network adapters, IP phones, an industrial Ethernet Switch with a unique number of ports, network cables or any other network and communications related equipment, then Alloy Equipment can help!

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Shipping

$11 Flat Rate Shipping